Fibertec Textile Guard Pro is our most effective and at the same time most productive impregnating agent for all types of modern functional textiles. It is not only particularly water-repellent, but also dirt- and oil-repellent. The impregnation is recommended for membrane clothing such as GORE-TEX® and other functional fabrics. It optimizes the breathability of modern functional membranes. Under its former name "Blue Guard Spray-On", Textile Guard Pro was the test winner in the category "Special impregnating agent for textiles" in the last impregnating agent test conducted by Stiftung Warentest, issue 09/2015. In addition to the pump spray bottle, the product is also available in an environmentally friendly refill bag.
» has a particularly strong water, dirt and oil repellent effect
» optimizes the vapor permeability of functional textiles
» recommended for GORE-TEX® and other membrane garments
» water-based
» contains no PFOS and PFOA
» highly concentrated and economical: content is sufficient for 4-5 textiles
» Bottle made of 100% recycled plastic
» Available in an environmentally friendly refill bag
» contains no microplastic
" vegan
Apply impregnation:
1. If applicable Pour refill bag into spray bottle (shake bag beforehand)
2. Shake the bottle well,
3. Lay damp clothing on a non-sensitive surface.
4. Textile Guard Pro is very highly concentrated. Clothing evenly thin
spray.
(100 - 120 ml are enough for 1 hard shell jacket, size L)
(120 - 150 ml is enough for 1 softshell jacket, size L)
Spread the impregnation evenly over the fabric with a sponge
and rub in. In this way the whole outside of the garment
treat. To counteract wicking, collars,
The hem and cuffs can also be treated from the inside.
5. Let the textile dry on a wide hanger, or the beading effect will come through
Improve heat treatment:
Textile Guard Pro gets its maximum beading effect from a heat treatment in the
tumble dryer or iron.